Johnson Controls AP-VMA1440-0 — The Johnson Controls Metasys AP-VMA1440-0 controller is a VMA or Variable Air Volume Modular Assembly controller from the 1400 and VMA1430 p

Part number	AP-VMA1440-0
Brand	Johnson Controls
Category	Controller
Description	The Johnson Controls Metasys AP-VMA1440-0 controller is a VMA or Variable Air Volume Modular Assembly controller from the 1400 and VMA1430 p
Manufacturer	Johnson Controls
Product Line	Metasys AS
Part Number	AP-VMA1440-0
Weight	1.50 lbs (0.68 kg)
Model Type	Variable Air Volume Modular Assembly (VMA) Controller
Supply Voltage	20-30 VAC
Supply Frequency	50 or 60 Hz
Power Consumption	10 VA maximum
Optional 24 VAC Fuse Current	2.0 Amps
Terminations	6.3 mm (1/4 in.) spade lugs (communication has screw terminals.)
Mounting	Mounts to VAV box with one screw.
Serial Interfaces	N2 Bus and Zone Bus
N2 Controller Addressing	DIP switch set (1-253) Addresses 254 and 255 are reserved.
Actuator Torque	4 N⋠m (35 lb⋠in) minimum
Minimum Shaft Length	44 mm (1 3/4 in.)
Ambient Operating Conditions	0 to 50°C (32 to 122°F) 10 to 90% RH non-condensing
Ambient Storage Conditions	-40 to 70°C (-40 to 158°F) 10 to 90% RH non-condensing

The Johnson Controls Metasys AP-VMA1440-0 controller is a VMA or Variable Air Volume Modular Assembly controller from the 1400 and VMA1430 product lines. It operates on a supply voltage range of 20-30 VAC at 50 or 60 Hz, and it consumes up to 10 VA of power. Its optional 24 VAC fuse current rating is 2.0 amperes. The AP-VMA1440-0 VMA controller supports N2 Bus and Zone Bus serial interfaces...

Compatibility data for this part number is being verified. Send an RFQ with your equipment model and serial — our suppliers confirm fitment before quoting.

Data compiled from 1 verified source. Last reviewed 2026-08-16.